Home

How can you keep track of alcohol units at the pub?

To keep track of alcohol units at the pub, check each drink’s serving size and alcohol by volume (ABV), calculate its units and record it as you order. Keep a running total rather than counting glasses, because the amount of alcohol varies with both the measure and the strength.

What is one alcohol unit?

One unit is 10ml, or approximately 8g, of pure alcohol, according to the NHS. A unit measures alcohol content, not a standard glass, bottle or serving.

To work out how many units you’re drinking, you need two details: the volume in millilitres and the ABV percentage. An ABV of 5% means that 5% of the drink’s volume is pure alcohol.

Check the pump clip, beer board, menu or bottle label for the strength. If you can’t see it, ask the bar staff rather than assuming that similar-looking drinks contain the same amount of alcohol. Check the serving size too: you’ll need a different calculation for a half pint, a pint or a bottle.

How do you calculate alcohol units?

Use this formula: ABV × millilitres ÷ 1,000. Enter the ABV as the number shown on the label, so use 5 for a drink labelled 5%, not 0.05.

For a 568ml pint at 5% ABV, the calculation is 5 × 568 ÷ 1,000 = 2.84 units. A 175ml glass of wine at 13% works out as 13 × 175 ÷ 1,000 = 2.275 units, or roughly 2.3.

You can use your phone calculator for occasional calculations. If you use a unit calculator or tracking app, check that it records alcohol units rather than another country’s definition of a standard drink. Those measures aren’t interchangeable.

Keep the unrounded figure in your tracker where possible. If you round each drink down, your final total can be lower than the amount you actually drank.

How many units are in common pub drinks?

You can use these examples as a reference, but always check your drink’s strength and measure before using the figures. All figures below are rounded to one decimal place.

  • A 568ml pint of beer or cider at 4% ABV contains about 2.3 units; at 5%, it contains about 2.8 units.
  • A 330ml bottle of beer at 5% ABV contains about 1.7 units.
  • A 125ml glass of wine at 12% ABV contains 1.5 units.
  • A 175ml glass of wine at 13% ABV contains about 2.3 units; a 250ml glass at the same strength contains about 3.3 units.
  • A 25ml measure of spirits at 40% ABV contains 1 unit; a 35ml measure contains 1.4 units.
  • A 50ml double measure of spirits at 40% ABV contains 2 units, before you add any alcoholic mixer or other ingredient.

Check the spirit measure before assuming that a single equals one unit. Check the strength of flavoured spirits and liqueurs too, as it can differ from the 40% used in these examples.

What’s the easiest way to record your units?

Use a note on your phone if you don’t want another app. Give each drink its own line and include the size, strength, units and running total. For example: “Pint, 4%, 2.272 units; total 2.272”, followed by “175ml wine, 13%, 2.275 units; total 4.547”.

Log each order immediately, including drinks someone else buys for you. If you wait until you leave, you’re more likely to forget a round, confuse a single with a double or overlook a change in strength.

  1. Set yourself a unit limit before your first order, taking into account any alcohol you’ve already had that week.
  2. Check the size and ABV before you order each drink.
  3. Record its units and add them to your running total.
  4. Check how many units you have left before accepting another round.
  5. Correct the entry if you leave some of the drink unfinished.

If you keep ordering exactly the same drink, save its calculation so you can use it again. Recheck it when you change the product, strength or measure, even if the glass looks the same.

How do you count the units in cocktails?

For cocktails, calculate the units in each alcoholic ingredient and add them together. A cocktail containing 50ml of 40% spirit already contains 2 units before you count any liqueur, wine or sparkling wine. Juice, soda and ice don’t remove the alcohol already in your glass.

Ask the bar staff about the recipe and measures. If they can’t confirm them, mark your entry as an estimate rather than treating it as an exact total. You’ll find it easier to track a drink accurately if you know its strength and serving size.

If you’re sharing a bottle, work out the whole bottle’s units, then count your share. A 750ml bottle of 12% wine contains 9 units; one-third contains 3 units. Only divide the total equally if everyone drinks equal amounts.

Avoid unmeasured top-ups if you want a reliable record. Finish one measured serving before accepting another, and don’t assume you can judge the volume of wine in a partially filled glass.

How should you use your running total?

To keep your risk low, the guideline is not to drink more than 14 units a week regularly. If you drink that much, spread your drinking over three or more days, as the NHS advises. Don’t treat this as a target or an allowance to save for one pub visit. Staying below it doesn’t make drinking risk-free.

Check your total before you decide what to order next. You can choose a smaller measure, a lower-strength drink or a non-alcoholic option. Check the label, because some alternatives still contain alcohol.

Keep recording your drinks throughout the week, including any you have at home. If you regularly drink more than you planned or find it difficult to cut down, speak to your GP or an alcohol support service for advice.

Sources